Q43 series Hydraulic crocodile alligator shear features

Product features:
1.Alligator shear machine use hydraulic drive, easy to operate, easy to maintain.
2.Alligator shear machine’s working blade length: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm, shear force from 63 tons to 400 tons in 8 grades. Hydraulic Shearing machine with knife edge above 700mm, especially suitable for cutting scrap cars, metal.
3.Alligator shear machine’s installation does not need the anchor screw, no power supply can be used for diesel engine power.
4.Our Unite Top machinery’s alligator shear machine adopts hydraulic transmission, and compared with mechanical transmission shearing machine, it has the advantages of small volume, light weight, small inertia, low noise, stable action, convenient operation, flexible, large shear section, convenient adjustment of scissors mouth, etc., safe operation and use, easy to realize overload protection.
Operation cautions of hydraulic alligator shear
1.When operating, the human body is not allowed to get close to the transmission part and knife edge of the equipment, and should pay attention to the surrounding personnel to prevent the material from warping and wounding.
2.When cutting, the material should be cut close to the knife as far as possible.
3.When cutting short material, the hand-held workpiece shall not be used for feeding, but the clamp shall be used for feeding.
4.When the equipment is running, the operator shall not leave the post without authorization. When the work is finished or temporarily away from the post, the power supply shall be cut off. At the same time, the machine shall not be repaired or touched the moving part by hand.
5.Each lubrication place of the machine should be filled with lubricating oil at least once per shift as required.
How to choose a suitable for their own crocodile shearing machine:
1.What material does the customer need to shear?
2.What’s the material kind, length, width, thickness?
3.What is customer daily capacity requirements?
4.According to the width of metal, our blade’s width can be customized.
5.According to the environmental condition of customer applicable equipment, the alligator shear’s hydraulic station can be customized.
6.All in one machine or split hydraulic alligator shears can be customized
7.Knife edge guard will also be necessary to avoid safety risks.


Post time: Mar-11-2022