Maintenance of Y81-2500 Metal Packing Hydraulic Press Machine

JIANGYIN Unite top heavy industry machinery Y81-2500 metal packing hydraulic press machine controls the molding and packing of metal wastes by hydraulic devices, which has wide popularization and use value in iron and steel enterprises and waste recycling enterprises, and is beneficial to the transportation and storage of waste products. We discusses the installation and debugging of Y81-2500 hydraulic scrap metal baler machine, explains the operation process of packing hydraulic press, and expounds the troubleshooting methods and maintenance of packing hydraulic press. Our Y81-2500 metal packing hydraulic press machine has stable performance and can meet the technical requirements of steel and renewable resource enterprises for equipment, thus greatly improving the reuse value of resources and protecting the environment. It promotes the development of low-carbon economy and promotes the cost advantage of enterprises through resource recycling.

1. Control  the oil quality to ensure safe operation

The quality of oil is the lifeline, the oil in the tank is strictly checked. The first thing to do is to carry out strict equipment filtration to ensure that there are no impurities and pollution. Reliable oil is the primary guarantee of safe operation. At the same time, it is necessary to make the working pipeline and the oil pump hold enough oil to avoid water or air mixed with oil to affect the working efficiency and lead to various failures. Reliable oil is the precondition and foundation of stable work, and must be firmly controlled.

2. Regular cleaning and replacement, diligence will be forever and for all

According to the provisions of the process of operation, regular cleaning of the oil tank makes oil and impurities nowhere to escape, the so-called frequent can compensate, no pains, no gains. The oil tank is the destination of all oil, but also a good hotbed of dirt and dirt. It is generally recommended to clean it regularly every six months to ensure that the impurities and small particles produced in the operation process are removed clean. In addition, when cleaning the tank, the oil will be replaced at the same time. Otherwise, the oil will be changed without changing the dosing, and the work will be twice as good as the work. Therefore, we must ensure that the periodic oil replacement and tank cleaning work is normalized.

3. Focus on the first cleaning, remember the time point

When the Y81-2500 scrap metal packing hydraulic press machine is used for the first time to put special emphasis on cleaning time node control, Y81-2500 scrap metal packing hydraulic press machine’s working pressure is big, work intensity is high, in the first use of the equipment of the first to use easy to advance the process of the micro particles and impurities into the tank, and therefore should pay attention to the work of cleaning the maintenance for the first time, generally including filters, control line cleaning thoroughly within 1 month, Good starting cleaning makes the Y81-2500 hydraulic scrap metal baling press machine run reliably for a long time.

4. Stop oil leakage phenomenon

The oil leakage phenomenon of the Y81 250 tons hydraulic scrap metal baling press machine is the fundamental cause of the aging of machinery and equipment. Therefore, regular observation and maintenance at ordinary times is the prerequisite to prevent oil leakage, and regular replacement of pipelines and seals is the basis to prevent oil leakage. In the process of operation of the Y81-2500 hydraulic scrap metal baling press machine, find the fault and abnormal phenomenon in time, if found, stop the machine and scrap metal baler in time for inspection, do not operate the metal baler machine and equipment with disease, take precautions. Through the phenomenon to find the essence of timely analysis and treatment, early troubleshooting.


Post time: Jun-28-2021